
Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Camera_Bracket.stl | Mount / bracket | 58.6 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit by adjusting the mount diameter to match your rear view mirror |
| Clip.stl | Clip | 35.8 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit by adjusting the mount diameter to match your rear view mirror |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Dash Cam Car Rear View Mirror Mount
Shared by
3DPrintedCarPartDescription
This mounts to the rear view mirror facing forward for the Rove 4K camera. It mounts to the rear view mirror for a 4runner but can be adjusted to fit by changing the diameter of the mount. You could also change the width for the camera mount if you have a different camera. It will require 2 M4 bolts and nuts. Length will depend on which vehicle its mounted to or if there are any cables in the way of the mirror stalk.
Compatible Cars
Originally published on thingiverse.com by Joey Rich (JR_Craftworks) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.

