Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Ballmount_Tacoma.stl | Mount / bracket | 68.4 KB STL | 11g $0.26 | 12g $0.29 | 26g $0.63 | Ensure the mounting surface is clean and dry for optimal adhesive performance |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
14.5mm ball phone mount for 3rd Gen Toyota Tacoma
Description
iPhone 12 pro max used in picture Used 3M Super-Strength Molding Tape, 03614, 1/2 in x 15 ft for sticking the mount to the car (might need to be modified for different adhesives) phone clamp from junkyard but probably can get one from amazon redesigned in tinkercad, just cut unnecessary parts on the original then copied the design below https://www.thingiverse.com/thing:5390699 ball was too small by 1mm the ball on the one I made is 14.5mm 20% infill.2 resolution.
Compatible Cars
Originally published on thingiverse.com by David (boiled4safety) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
