Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tacoma (2nd Gen) coin tray phone charger
Shared by
3DPrintedCarPartDescription
Designed a holder/charger that fits in the little coin tray next to the shifter of the 2nd gen Toyota Tacoma 2005-2015. I added space to insert one of the wireless charging chips you can get from China. I got mine from AliExpress for about $4. Currently the wireless chip is hot glued in while I work out any kinks. I'll re-evaluate this when summer hits. The pad fits phones with cases up to 165mm x 84mm or ~6.5in x 3.3in. I had some concerns that the top heavy design might slip out of the tray so I added sand into the base while it was printed. This may not have been necessary since it fits pretty snug into the tray. I printed this on its side as the layer lines help add to the carbon fiber look. There are 2 models, 'Tacoma Tray Charger Carbon' is what is pictured that I printed for my truck before having the idea for 'Tacoma Tray Charger TRD' where I added a TRD logo to it.
Compatible Cars
Originally published on thingiverse.com by Andrew Land (metech777) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
