Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Knob_2.stl | Primary model | 94.4 KB STL | 12g $0.29 | 13g $0.31 | 29g $0.69 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Dash Knob - 1963 to 1964 Plymouth wiper
Shared by
3DPrintedCarPartDescription
This knob is designed to fit a D-shaped shaft as used for windshield wipers (without the washer button) and the fan control on a 1964 Valiant, and to resemble the factory knobs. It is designed in two pieces to eliminate overhangs and supports. I simplified the dished steps in the center, and changed the fluting to work with Sketchup and my beginner-level work. There is no provision for a set screw, but it fits tightly enough on the D-shaft that one should not be necessary. ABS should stand up to summer temperatures better. Be careful with bed adhesion. I needed another knob for a vintage-style under dash air conditioning evaporator, to match the rest of the knobs on the dash. Nicely chromed metal reproductions are available, but it looked like a fun project to draw up and print..
Compatible Cars
Originally published on thingiverse.com by Lyndal Davis (Slantvaliant) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
