Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| dashtrimrepair_f150_v11.stl | Primary model | 8.1 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
dashTrimRepair_f150_v1.1
Shared by
3DPrintedCarPartDescription
This is a repair part for the dashboard trim panels on a 1992-1996 Ford F150-F350. Broken tabs can be ground from the rear of the trim part and these replacement clips epoxied in place. The existing small metal retaining clips should be removed from the old part and placed on the new tabs. This is Prototype #2. The tab height has been increased +2mm and a hole has been inserted at the bottom center of the tab to better accommodate the metal clip. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bEglwK5CRKZ
Compatible Cars
Originally published on thingiverse.com by Louis LeBrun (Sprokitt) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
