Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| F-150_XM_COMMANDER_TOUCH.stl | Primary model | 226.5 KB STL | Slice file | Slice file | Slice file | Ensure the model is oriented to minimize supports, especially around the hole for the connector |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
SirusXM Commander Touch for 2018 ford F-150
Shared by
3DPrintedCarPartDescription
Upgrading my 2018 F-150's stereo to a 12" touch screen. The only to get the sirus XM to work with it was either to connect to my phone all the time or install the sirus XM commander touch. In order to snake the connector to the radio a small (11 mm) hole will need to be drilled on the surface facing the windshield which will be covered by the printed bracket. I will upload the finished install once that occurs.
Compatible Cars
Originally published on thingiverse.com by james long (jammbo) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
