Files (1)
Based on 15% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 15% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Deluxe.stl | Primary model | 85.0 KB STL | 12g $0.28 | 11g $0.26 | 28g $0.67 | Use 2-3 perimeter shells for added strength |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Deluxe VW Bus Emblem
Shared by
3DPrintedCarPartDescription
I created a simple Deluxe emblem to go on my early Bay Window. Almost perfectly matches the early "Volkswagen" script that goes on the back of a bus. Use whatever settings work for your printer, I used 3 top and bottom solid layers, 2 perimeter shells and 10% infill on a Flashforge Creator clone. Paint if you want and use double sided emblem tape to stick on the back of your bus.
Compatible Cars
Originally published on thingiverse.com by Andy Foster (blue72beetle) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
