Flaschen_Duse.stl

STL

701.1 KB

Flaschenhalter.stl

STL

494.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Flaschen_Duse.stl	Printable file	701.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
Flaschenhalter.stl	Printable file	494.7 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Desinfektion use/store in a Land Rover Defender

0 downloads32 views0 likes

Shared by

Verified

Description

Little helper to hold a rectangular 1l bottle upright in the backsides ao a Land Rover Defender. - Nozzle to reduce spill of disinfection fluid and to limit spill. Added a o-ring to seal it. Not perfect, but useful (my opinion;-)