Files (11)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| bezel-back.v5-hinge.STL | Printable file | 605.4 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| bazel-face.v6-inside.snap.STL | Printable file | 370.9 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| attachment.plastic.rivet.STL | Printable file | 43.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| attachment.bar.v2.5-tilt.STL | Printable file | 136.6 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| bazel-face.v6-front.STL | Printable file | 224.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| bezel-back.v5-outside.snap.STL | Printable file | 176.8 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| bazel-back.v5-panel.STL | Printable file | 426.7 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| battery.holder.LG.G2.battery.STL | Mount / bracket | 329.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| battery.replacement.STL | Printable file | 621.7 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| attachment.screw.spacer.STL | Printable file | 189.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| attachment.bar.v2.5-tilt-spacer.STL | Accessory piece | 18.1 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
DIY Nexus 5 car navigation for Fiat 500 factory headunit
Shared by
3DPrintedCarPartDescription
*NOTE* these parts were one-off drawn meant to be post finished (trimmed, cut, filed, sanded, filled, and painted) for one (my) very specific use. Other post-print finish work might be needed to fit your purpose. Project posted at https://redd.it/67yvdm This was designed as part of my DIY Nexus 5 car navigation project. Didn't think people would be interested in the STLs as they were very specific drawn for my use. But since people asked for it here they are!
Compatible Cars
Originally published on thingiverse.com by Brandon Chuang (chilicoke) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
