Dodge Caravan / Routan Van Rear Entertainment System Tablet bracket - image

Files (2)

dodge_left.stl

STL

74.2 KB

dodge_right.stl

STL

74.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dodge_left.stl	Choose left variant	74.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
dodge_right.stl	Choose right variant	74.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dodge Caravan / Routan Van Rear Entertainment System Tablet bracket

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dodge Van rear entertainment tablet clip. Fits Nvidia Shield and a Nexus 7 (with cover). I sure it will fit other 8 to 7 inch tablets. Print in ABS to avoid warping.