Dodge Challenger (3.6L) oil catch can mount - image

Files (3)

mount_part1.stl

STL

20.8 KB

mount_part2.stl

STL

85.5 KB

mount_part3.stl

STL

272.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
mount_part1.stl	Mount / bracket	20.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
mount_part2.stl	Mount / bracket	85.5 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit over the suspension nut and jumper ground post
mount_part3.stl	Mount / bracket	272.3 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit over the suspension nut and jumper ground post

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Dodge Challenger (3.6L) oil catch can mount

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Want to add a catch can to my Challenger. Do not want to drill holes. This mount is attached to the jumper ground post and slides over the big suspension nut next to the fuse box. Only need a few m5 nuts and bolts and some washers at ground post. Have to find out myself if this mount keeps up. Also have to do the plumbing for the catch can. The mount leans again the inner wheel arch, i think that adding some tape to that part is a good idea, otherwise i might do some damage to the paint over time while rubbing against it. The can i use is a cheaper model, link under this message. I printed in ABS, think that PETG will also do, time will tell. This work is in progess. Enjoy! https://nl.aliexpress.com/item/4000965661181.html?spm=a2g0s.9042311.0.0.27424c4d7WNgAF

Compatible Cars

Dodge Challenger

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by richard te pas (hendrik6073) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.