Files (3)

Support_Telephone_Dodge_Piece1_01.STL

STL

193.4 KB

Support_Telephone_Dodge_Piece2_01.STL

STL

32.3 KB

Support_Telephone_Dodge_Piece3_01.STL

STL

19.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Support_Telephone_Dodge_Piece1_01.STL	Printable file	193.4 KB STL	Slice file	Slice file	Slice file	Use 2 M3x10mm screws with nuts for assembly
Support_Telephone_Dodge_Piece2_01.STL	Printable file	32.3 KB STL	Slice file	Slice file	Slice file	Use 2 M3x10mm screws with nuts for assembly
Support_Telephone_Dodge_Piece3_01.STL	Accessory piece	19.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Dodge Journey Phone holder

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Here a smartphone holder for the car Dodge Journey. It is in 3 parts and one is not attached. You have to put it directly at the bottom of the pocket. It is to hold the system. I used 2 M3x10mm screws with nuts.