Files (5)

DodgeJackClip1.stl

STL

27.8 KB

DodgeJackClip2.stl

STL

21.6 KB

DodgeJackClip3.stl

STL

28.0 KB

DodgeJackClip4.stl

STL

28.2 KB

DodgeJackClip5.stl

STL

27.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
DodgeJackClip1.stl	Clip	27.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
DodgeJackClip2.stl	Clip	21.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
DodgeJackClip3.stl	Clip	28.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
DodgeJackClip4.stl	Clip	28.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
DodgeJackClip5.stl	Clip	27.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Dodge Ram Jack Clips

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dodge Ram Jack Clips - My jack had broken clips that hold the handle and crank. So I took dimensions and printed new ones. They work like a charm! I printed these with PLA at 25% fill with support. I tried an early version at 100% fill and it cracked when I mounted it in the jack holder - but that may just be because of wrong dimenstions. If you try it at 100% or with some other plastic, let me know and I'll post that info too!