Files (1)

Dodge_Ram_Emblem_Fixed_Gap.stl

STL

497.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dodge_Ram_Emblem_Fixed_Gap.stl	Primary model	497.1 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Dodge Ram Truck Emblem - Fixed

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I fixed the gap in the model between the plate and the ram head (as seen in pictures of model section view) I will be printing for a coworkers 2010 ram to replace the missing emblem. Will add a second model with the adjusted scale to fit the gen 4 Ram Truck.