Files (3)

Evil_Ram_Back.stl

STL

22.7 MB

Evil_Ram_Front.stl

STL

28.1 MB

Evil_Ram_New.stl

STL

42.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Evil_Ram_Back.stl	Printable file	22.7 MB STL	Slice file	Slice file	Slice file	Print with the front side facing upwards for better surface finish.
Evil_Ram_Front.stl	Printable file	28.1 MB STL	Slice file	Slice file	Slice file	Print with the front side facing upwards for better surface finish.
Evil_Ram_New.stl	Printable file	42.4 MB STL	Slice file	Slice file	Slice file	Print with the front side facing upwards for better surface finish.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Evil Dodge Ram Grill Emblem

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Bought an 09 Dodge Ram. The previous owner decided to paint all the badges and emblems. Instead of trying to fight with removing all the paint off the emblems I decided to make my own grille emblem. You can print the full model with support if you want to fight with removing the support. You can also print the front and back pieces separately if it's easier for you. Printing them separately does make it easier to print the back, due to the arc being up, instead of being on the build plate. Happy printing. I'll probably make one for the tailgate next.