Files (3)

insert_tri.stl

STL

15.3 KB

shifter_bottom.stl

STL

468.4 KB

shifter_top.stl

STL

162.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
insert_tri.stl	Accessory piece	15.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
shifter_bottom.stl	Printable file	468.4 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of the two-piece design during printing
shifter_top.stl	Printable file	162.1 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of the two-piece design during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Dodge Shifter Knob Np208

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

STL for a transfer case shifter knob. mounting hole is.25" able to drilled out up to.5" not thread. this is still a rough model. this is a two piece designed that way to be printed with the most detail.