Files (2)

Door_Handle_Clip.3mf

3MF

33.2 KB

Door_Handle_Clip.stl

STL

113.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Door_Handle_Clip.3mf	Clip	33.2 KB 3MF	Slice file	Slice file	Slice file	Ensure proper fit within the door handle before printing
Door_Handle_Clip.stl	Clip	113.0 KB STL	Slice file	Slice file	Slice file	Ensure proper fit within the door handle before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Door Clip for Scion/Toyota

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The clip on my 2006 Scion TC door handle broke. The door would open from the inside but not the outside. Just install this clip into the handle, then press the rod through to hold it in place. I believe it is part # 69293H not expensive but I wanted it today. Remixed from a similar clip but lengthened. https://parts.toyota.com/a/Scion_2006_TC/_65510_6711689/FRONT-DOOR-LOCK--HANDLE/277410-6703.html