Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Double Din AC Relocation Bezel for BMW E46, cheap solution
Shared by
3DPrintedCarPartDescription
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original frame, the 3d printed part (I call it clamp) and a nut/bolt to fix everything in place. Youtube video of the 3d clamp installation The original frame is altered just a bit. On the left side it has a small lip that needs to be cut off, this helps with the AC panel alignment.(see image) Before the final assembling you'll have to fully slide the clamp on the AC panel. Drill a hole through the original frame using the model hole as a template. Make sure the bolt and nut are locking with ease. This solution doesn't require any new bezel or front lip.
Compatible Cars
Originally published on thingiverse.com by Dany C (R4iNER) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
