Dual gauge pod dovetail R56 Mini cooper - image

Files (1)

r56_gauge_pod_dovetail_v2.stl

STL

120.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 28%	100% solid	Recommendation
r56_gauge_pod_dovetail_v2.stl	Primary model	120.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Dual gauge pod dovetail R56 Mini cooper

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A better gauge pod for the R56 mini cooper (and probably other 2nd gen versions). This screws into the back of the stock tachometer. Standard 52 mm gauges fit. Does not interfere with the dash and is visible at most steering wheel angles. A word of warning, the threads in the tachometer strip very easily especially if you are trying out pods like this again and again. Print with more than 20% infill so it won't wobble. Spacing for the holes was borrowed from someone else's model (https://www.thingiverse.com/thing:4630509)