Mini Cooper F56 Magsafe Puck Dash holder - image

Files (1)

Mini_Cooper_F56_magsafe_holder_V4.stl

STL

235.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mini_Cooper_F56_magsafe_holder_V4.stl	Mount / bracket	235.8 KB STL	Slice file	Slice file	Slice file	Ensure the holder is oriented to minimize supports in the slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Mini Cooper F56 Magsafe Puck Dash holder

0 downloads101 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a dash holder for the Apple Magsafe Puck charger to fit the Dash of a Mini Cooper F56. The holder attaches to the bottom of the Center ring. You can use double sided tape and/or use the 2 holes and drill through the bottom of the center ring. Obviously take of the ring first:).