Files (1)

intake_holder.stl

STL

777.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
intake_holder.stl	Mount / bracket	777.4 KB STL	Slice file	Slice file	Slice file	Print with the face down to utilize the build plate for support

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

E30 Headlight block off

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Headlight block off, Prints best face down with supports for tabs, can be embossed. Confirmed to work with sealed beams and M5x20 bolts. Should also work for ellipsoids. Needs to be canted off center about 10-15 degrees for embossments to line up. Just look at the headlight mounting bracket and you'll get it.