Touring 3rd brake light for E30 BMW vehicles - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Touring 3rd brake light for E30 BMW vehicles

0 downloads40 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Update: Added a wider, shorter version. *currently redesigning the clips because they push the trim piece up and misalign the light.* This is a 3rd brake light housing for an E30 BMW Touring. Small one fits an approx. 82mm wide prototype board chopped down in height and large one fits a 180mm wide board with one end shortened (about 176mm). Work in progress. Tabs printed separately and glued on, so no supports. I suggest ABS for heat in vehicle and ease of solvent glue.