Easy-to-install car vent mount phone holder for Toyota RAV4 - image

Files (2)

bottom-piece.stl

STL

73.7 KB

top-piece.stl

STL

70.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bottom-piece.stl	Printable file	73.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
top-piece.stl	Printable file	70.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Easy-to-install car vent mount phone holder for Toyota RAV4

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I tested many phone holders for my Toyota RAV4, and finally decided to make a custom one. Magnetic car mounts are not compatible with wireless chargers (because of the metal plate you need to fix to the phone). The rest are bulky and hard to mount/dismount or bulky. Print two pieces of each item Two machine screws 8-32 https://www.lowes.com/pd/Hillman-8-32-x-1-in-Phillips-Slotted-Combination-Drive-Machine-Screws-100-Count/3037603 I tested it with my Creality LD-002R (resin) and with my XYZ Da Vinci (PLA). Resin items need polishing. Sandpaper (350, 1500, 2000) - it takes 5-10 minutes to polish each item. Buy some wax polish to make it clean and shiny. The resin print was ready to use. The PLA print in my case required some quick post-processing with a drill. Probably, this is because my printer didn't make it right.