Equivalent of BMW 51 71 7 892 798 - image

Files (1)

Bracket_revisedClip.stl

STL

90.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bracket_revisedClip.stl	Clip	90.3 KB STL	Slice file	Slice file	Slice file	Print with a brim or raft for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Fenders

Equivalent of BMW 51 71 7 892 798

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

MAR 6 - Revised so this should better "clip" into the BMW fender liner ---- I made this part to replace a (normally $50) BMW part found on the e46 M3 - it's one of the supports for the plastic under-tray. This part is a work in progress - I've printed the primary bracket, and it works well with lots of support laying on its side. I haven't been gutsy enough to try printing vertically. The model attached has extra triangular support not pictured. I am unsure as to whether this will allow the fender liner to attach- the dimensions are identical to the BMW part, except for the thickness. This may not contort enough to affix the fender liners, but I can't test it since mine are snapped.