Files (2)

cord_sleeve_left.stl

STL

1.4 MB

cord_sleeve_right.stl

STL

1.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cord_sleeve_left.stl	Choose left variant	1.4 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
cord_sleeve_right.stl	Choose right variant	1.5 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

EV Charger Cord Sleeve

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed and built this cord sleeve holder for my wife's electric car to keep the level 2 charger cable of the ground. This was built specifically for the ClipperCreek level-2 charger cord, though I suspect it will work with others. I use it conjunction with 2kg spring tool balancer to keep cord of the ground and retractable. https://www.amazon.com/gp/product/B07NS15NXH/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 I use M3 screws to fasten the two parts together.