Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| renault_mini_key.stl | Primary model | 219.1 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry print bed for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
EXTRA SMALL key case for Renault Megane 4, Talisman, Kadjar, and Espace 5 key cards.
Shared by
3DPrintedCarPartDescription
Hi! This is an extra small key case that fits the Renault Megane 4, Talisman, Kadjar, and Espace 5 key cards. I bought a Talisman but the key is just way to big! Its bigger then my phone. Also it doesn't come with a hole to hang it on my key chain. Its like the idiots at Renault want you to hate them. Just check out the difference with a normal Renault car that has the same options [Image-0.jpg] So i decided to slim down the key as much as possible without any soldering. Follow these simple instructions: 1- Take of the back cover to expose the white inner cover. [Image-1.jpg] 2-Remove the black battery lid and remove the battery. 3- Carefully pry off the white plastic cover to expose the PCB underneath. [Image-2.jpg] 4- Remove the PCB, and remove the metal frame from the buttons by pushing on them.[Image-3.jpg] 5-Click the PCB back on the part with the buttons. Insert the battery and put on the XS mini case. [Image-4.jpg] 6-Enjoy your new small key!
Compatible Cars
Originally published on thingiverse.com by XX XXXX (Flup3) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
