Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Freno_Mano_Megane2007.stl | Printable file | 3.2 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation to minimize supports |
| Tapa_Freno_Mano_Megane_2007_SinRedondeo.stl | Printable file | 73.3 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Freno Mano Megane 2017
Shared by
3DPrintedCarPartDescription
This is a functional part to replace the plastic part of the handbrake of a Renault Megane 2007. Unfortunately the original part is stuck and must be broken or completely replace the mechanism, which requires a high cost and is not an ecologically sustainable solution. Both the lid and the shape need aesthetic and ergonomic improvements that I will try to improve in the future. You need the original button, the screws and the spring, so I recommend to be careful when the plastic is broken.
Compatible Cars
Originally published on thingiverse.com by Trueman Olson (Htrueman) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
