Files (2)

F150_Console_Organizer_medium.stl

STL

95.7 KB

F150_Console_Organizer_long.stl

STL

96.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
F150_Console_Organizer_medium.stl	Printable file	95.7 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
F150_Console_Organizer_long.stl	Printable file	96.3 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

F150 Console Organizer

0 downloads200 views0 likes

Shared by

Michael Chen

Verified

Description

F150 Center Console organizer for 2015-2020. Things were loose in the console tray, and you can go higher than the tray height, so used these dividers to allow items to sit more upright. Use all three files to stack the dividers in a row to fit inside the console tray.