qi_cradle_softened.stl

STL

384.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
qi_cradle_softened.stl	Primary model	384.2 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

F150 Phone and QI Charger tray

0 downloads52 views0 likes

Shared by

Verified

Description

My Samsung S6 with it's lifeproof case didn't fit in my 2017 Ford F150's tray in the console section of the jump seat. I designed this tray to also fit my MC-02A QI charger (https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR1.TRC0.A0.H0.Xmc-02a.TRS0&_nkw=mc-02a&_sacat=0) The tray can be used with or without the charger and will accomodate larger phones like a Note 4, up to 157mm x 85mm. There is a cut-out for the charging cable to attach to the charger or a phone. Sketchup file is included for anyone that wants to modify it. Larger version added here: https://www.thingiverse.com/thing:2744915