Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Ford F-150 Phone Holder

0 downloads42 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Phone Holder I built for my F150. For 2009-2014 Ford F-150 that do not have a Brake Controller. This will replace the rubber mat that is in that area. The phone dimension is 9.6mm thick and approximately 84mm wide. Basically it will fit my Iphone 7 Plus with a TPU case. I build another one for the passenger side. I recommend putting some type of adhesive like velcro or something at the base to secure it better.