Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Fanatec BMW Shift Knob Adapter

0 downloads51 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I wanted to use an OEM BMW shift knob with my Fanatec Shifter, but I couldn't find an adapter to go from the M12 thread on the shifter to the BMW slip rod. I took some measurements and created this, which screws on to the Fanatec shift lever and then the BMW knob pressure fits on top. It's a pretty tight fit, and the BMW knob doesn't move or turn when using it. I printed this using 100% infill which is probably not necessary, but I wanted to make sure it was strong. I used PETG however my guess is PLA would also work just fine. No supports necessary, printed with the threaded portion on the build plate. WARNING/DISCLAIMER: This was not designed for use in a real car. If you try to use it in a real car, I'm not responsible if it breaks or comes loose. If it breaks on a racing simulator that will be annoying, but not potentially life-threatening.