Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Fiat 500 Abarth Engine Cover

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is an engine cover for a Fiat 500 Abarth to replace the factory cover if you replace the factory air intake system. I sent the file to SendCutSend.com and asked them to laser cut it from 0.125 thick 2024 alloy. They bent the edges too, 45 degrees up on the aft edge and 30 degrees down on the forward edge. Feel free to use this file for non commercial purposes.