Fiat 500 wheel arch plug 71752114 - image

Files (1)

Wheel_Arch_Plug_71752114.stl

STL

255.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Wheel_Arch_Plug_71752114.stl	Primary model	255.7 KB STL	Slice file	Slice file	Slice file	Check the model's orientation and adjust supports as necessary in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Fiat 500 wheel arch plug 71752114

0 downloads67 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I tilted the model by 10 degrees to save time and the amount of tree supports. Catalog note: Fiat 500 wheel arch plug 71752114 is a 3D-printable car-part listing indexed for classified fitment Fiat 500. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.