Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Fiesta ST AccessPort V3 Mount
Shared by
3DPrintedCarPartDescription
This is a mount for use with the Ford Fiesta ST. It is a two-piece print that utilizes the cradle that is included with the AccessPort V3. This print took a lot of tweaking to get the fit perfect for my vehicle so it may not fit properly since all printers are slightly different. Try increasing or decreasing the overall scale of the print a few percent if it doesn’t fit properly the first time. The arm will be the trickiest print but isn’t too bad, use custom supports as shown in the gallery if possible to save some material.
Compatible Cars
Originally published on thingiverse.com by (mdonald623) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
