Files (2)

Fiesta_ST_Hole_Cover.STL

STL

76.7 KB

ST_Logo_Infill.STL

STL

134.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Fiesta_ST_Hole_Cover.STL	Cover / cap	76.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
ST_Logo_Infill.STL	Printable file	134.7 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Fiesta ST MK7 Hole Cover

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This piece is a cover for the pointless hole above the seat heating buttons in the Fiesta ST MK7. It was inspired by the cover put into the Fiesta ST200 which I think does not really fit to the car, because of its brushed metal look. Simply print out both pieces, stick them together and glue them. They should just perfectly fit into the hole. The tolerances in this model are quiet high due to my low-cost printer model. If you need a tighter spacing feel free to pm me. I will try to soon upload.step files also to make customizing easier. *EDIT:* Now added *.igs files for easier customization.