Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Bottom_piece.stl | Printable file | 325.9 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the Bottom_piece.stl to prevent warping |
| E46_Adapter.STL | Printable file | 89.7 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the Bottom_piece.stl to prevent warping |
| Top-piece.stl | Printable file | 77.2 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the Bottom_piece.stl to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Fire Extinguisher mount for BMW E46
Shared by
3DPrintedCarPartDescription
UPDATE(18/01/2020): https://www.thingiverse.com/thing:4111301 Was having some trouble to fit the "e46_adapter" to my seat, and also to my fire extinguisher. This redesign is a little bit taller, and the gap is wider between the mounts.
Compatible Cars
Originally published on thingiverse.com by Joao Pereira (Jolubeat) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
