Ford 1989 f150 windsheild wiper replacement knob - image

Files (2)

washer_knob.stl

STL

1.2 MB

washer_knob_large_pattern.stl

STL

1.1 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
washer_knob.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports
washer_knob_large_pattern.stl	Printable file	1.1 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Ford 1989 f150 windsheild wiper replacement knob

1 downloads206 views0 likes

Shared by

Michael Chen

Verified

Description

This is my first posting to Thingiverse. I made this windshield wiper knob for my truck just because. Its not the best but it works. The file with a larger pattern has a .4mm pattern because the original pattern is too small for my printer nozzle. Make sure to block supports in the middle because they are a pain to get out.