Files (1)

BrakeLightMount.stl

STL

97.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BrakeLightMount.stl	Mount / bracket	97.0 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with the slots touching the build plate to minimize support material

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Ford F150 High Camera Mount

0 downloads179 views0 likes

Shared by

Michael Chen

Verified

Description

***Note: I'm redesigning this mount to push the center of gravity forward. Mounts to third brake light with no modifications to vehicle. Uses existing screws and holes. Recessed slots for fasteners. Does not interfere with brake light operation or visibility. Attach a backup camera, rearview camera or GoPro to the roof of your 2018-2020 F150. May fit older or newer trucks. Great for towing. Should work with most small waterproof cameras. Follows the contour of the light housing. Uses minimal filament. Less than 1.5 hours print time on most printers. Print upside down with slots touching buildplate w/support over >75 degrees overhang.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

2018 Ford F 150

Published Mar 7, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.