Ford 8.8 ABS Block off plug gasket - image

Files (1)

8.8_Plug_v7.stl

STL

314.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 30%	100% solid	Recommendation
8.8_Plug_v7.stl	Primary model	314.4 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford 8.8 ABS Block off plug gasket

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a block off plug gasket that fits Ford 8.8 rear ends and only requires a 1/4" thick steel plate with a bolt hole to seal off the ABS sensor pickup port. Makes for a clean seal when modifying this rear end to fit many hotrod and or off-road applications. Filament TPU walls 3 infill 30% (This one was designed with intentions to be installed in a 1980 Chevy LUV Hotrod).