Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Ford_Fifth_Wheel_Puck_Grommet.stl | Accessory piece | 15.7 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| Ford_Goosneck_Puck_Grommet.stl | Accessory piece | 15.7 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Box Hole Grommets
Shared by
3DPrintedCarPartDescription
Grommets designed to cover the holes around the universal hitch in the back of newer Ford F-series pickups. I added a cover to my box and found snow was still able to enter through these openings, so I created these to fill that gap. Should work on all 2011 or newer pickups that came with Factory installed Fifth Wheel Hitch/Goose neck attachment. The design is beveled to the bed of the pickup, so when sliding things in and out of the bed, they will guide object over the hitch portion that sticks out of the bed. Fits tight with existing hitch and should not need to be removed when using the hitch.
Compatible Cars
Originally published on thingiverse.com by Tanner Sorensen (tannersorensen) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
