Files (2)

Ford_Fifth_Wheel_Puck_Grommet.stl

STL

15.7 KB

Ford_Goosneck_Puck_Grommet.stl

STL

15.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Fifth_Wheel_Puck_Grommet.stl	Accessory piece	15.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Ford_Goosneck_Puck_Grommet.stl	Accessory piece	15.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Ford Box Hole Grommets

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Grommets designed to cover the holes around the universal hitch in the back of newer Ford F-series pickups. I added a cover to my box and found snow was still able to enter through these openings, so I created these to fill that gap. Should work on all 2011 or newer pickups that came with Factory installed Fifth Wheel Hitch/Goose neck attachment. The design is beveled to the bed of the pickup, so when sliding things in and out of the bed, they will guide object over the hitch portion that sticks out of the bed. Fits tight with existing hitch and should not need to be removed when using the hitch.