Ford Car Battery Hold Down Wedge - image

Files (1)

Battery_Wedge.stl

STL

1.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
Battery_Wedge.stl	Primary model	1.0 MB STL	Slice file	Slice file	Slice file	Use a high adhesion bed surface or brim for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Car Battery Hold Down Wedge

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a battery hold-down wedge for an unknown car make (I think Ford or GM), so if it looks familiar, let me know what it is from. I included pictures of the black original next to my printed blue one. You may notice a few differences in the photos. My version was meant to be a functional match rather than an exact match. The design software I used has some limitations, so the bolt hole is not a perfect hole, but a stepped bore. The bumps you see on the original are replaced with straight rows to "bite" into the battery. I used a thick perimeter of 10 and 50% infill since these can have some significant tension on them. That may be overkill though. I used PLA to make this, but that is not a great material for temperatures in the engine compartment.