Ford exhaust port plug caps 289 302 351 Windsor - image

Files (1)

exhCap4.stl

STL

191.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.39

Filament only at roughly $24/kg PETG / ASA

Print time

28m–46m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
exhCap4.stl	Cover / cap	191.7 KB STL	15g $0.36	16g $0.39	36g $0.86	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford exhaust port plug caps 289 302 351 Windsor

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dust caps for standard 1.5" x 1.125" exhaust ports on a Windsor family small block Ford motors. 5.0, 289/302/351. Useful when spraying engine cleaner or painting as it just leaves a little area that doesn't get paint. For a little more serious washing of the motor, an O ring could be stretched around the sealing surface that goes into the port opening, there is a groove to hold the O-ring in place. Not meant to be totally waterproof, but pretty good.