Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Rear_and_Front_Badge.stl | Primary model | 600.5 KB STL | Slice file | Slice file | Slice file | Use a brim or raft for better adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford F150 Badges (04-08)
Shared by
3DPrintedCarPartDescription
Here are a couple of Badges for the F150 04-08 years. 3DPG (3D Performance Geometries) is a brand of mine I am trying to promote. The front badge has screw holes to align where the original was on the grill. That same badge also fits on the rear where you can use the channel grooves on the back to apply adhesive. The side badges also have grooves in which to apply adhesive. There are no alignment pins like the original. I masked off the old badge with tape and aligned it with that location. The lower left tailgate badge file was corrupted and I'll have to upload when I get it fixed Printed in ABS, works out well on my TAZ 5..25mm Layer Height seemed to look nice. Finished badges with a bedliner coating and hand painted the gold.
Originally published on thingiverse.com by Ben Heuer (Rottenapple311) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
