← Back to Browse Parts
Files (2)
Ford_Fiesta_Hood_holder_clip_V1.STL
STL
43.6 KBFord_Fiesta_Hood_Holder_clip_V2_bolt_and_Nut.STL
STL
48.9 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
2 model files
Typical selected file
11g
Based on 25% main infill for the largest likely-needed model file
Material cost
$0.26
Filament only at roughly $24/kg PETG / ASA
Print time
19m–31m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Ford_Fiesta_Hood_holder_clip_V1.STL | Clip | 43.6 KB STL | 10g $0.24 | 11g $0.26 | 23g $0.56 | Ensure proper orientation for minimal supports |
| Ford_Fiesta_Hood_Holder_clip_V2_bolt_and_Nut.STL | Clip | 48.9 KB STL | 10g $0.24 | 11g $0.26 | 24g $0.58 | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hood
Ford Fiesta MK5 Facelift Hood holder clip
0 downloads39 views0 likes
Shared by
3DPrintedCarPartVerified
Description
Ford Fiesta MK5 Facelift Hood holder clip 2 version: - Clip version - Bolt version (need a M3 inbus screw, M3 nut and washer) Good for Fiesta/Fusion 2004-2008.
Compatible Cars
Published Jun 27, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by David Farkas (dwolf) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Finding specific fitment/category matches first.
