Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mustang_Hood_Clip_Rev2_slimmer.stl | Clip | 42.3 KB STL | 10g $0.23 | 11g $0.25 | 23g $0.56 | Ensure a snug fit by adjusting the print orientation and scaling if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Slimmer Fox Body Ford Mustang hood prop retaining clip
Shared by
3DPrintedCarPartDescription
Had to shave off a little of the original design to fit on my 1990 Ford Mustang GT Vert as my hood prop retainer mounting location is 7.6mm wide and the print came out at around 7.9. Total print height came out at 12.6mm which is what the slicer said it should be so think my car just might be a little different for the mounting location size. This version is a pretty snug fit on mine, I also added the angles to help with the initial guiding in since it's a pretty tight fit still near the end. --- # Tinkercad This is a remix of https://www.thingiverse.com/thing:2750733 done via Tinkercad. Link: https://www.tinkercad.com/things/jUJ8eBhWTOH-1990-ford-mustang-hood-prop-retainer Notes: The objects have been left ungrouped so you can reposition if needed for additional clearance.
Compatible Cars
Originally published on thingiverse.com by Cameron Carranza (cameroncarranza) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
