Fox Body Ford Mustang hood prop retaining clip - image

Files (2)

Mustang_Hood_Clip_NoSupports.stl

STL

37.1 KB

Mustang_Hood_Clip_Rev2.stl

STL

78.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mustang_Hood_Clip_NoSupports.stl	Clip	37.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
Mustang_Hood_Clip_Rev2.stl	Clip	78.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

Fox Body Ford Mustang hood prop retaining clip

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A hood prop retaining clip I made for my 1990 Ford Mustang. It is modeled as close to stock as possible and requires supports. I also made a no supports version that is flat on one side so it should be easier to print.