Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mk6FiestaWindowTrimClip.stl | Clip | 42.0 KB STL | 10g $0.23 | 11g $0.25 | 23g $0.56 | Print with the part upside down to minimize support material in critical areas |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Fiesta Mk6 External pillar moulding trim clip
Shared by
3DPrintedCarPartDescription
Tough part to print. Best result I have found so far is print upside down and break away the supports. Printing upright makes it too hard to clear away the support material from the retaining lugs. This is a first attempt and replicates the factory part. May need to redesign in the future...seems these clips have been a bit of an issue since the beginning of time.
Compatible Cars
Originally published on thingiverse.com by Steve Harris (NZBikerFlyer) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
