Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Links2.0.STL | Printable file | 119.8 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| Rechts2.0.STL | Printable file | 120.4 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Fiesta MK7 Carpet Mat Clip Adapter
Shared by
3DPrintedCarPartDescription
If you want to install new floor mats for a Fiesta MK7 2010, you will notice that the old floor mats have oval holes and the holders are fastened under the seat. The new floor mats have round holes and are attached directly to clips on the vehicle floor. The old holders are simply exchanged for the new holders. Rechts= Right Links= Left.
Compatible Cars
Originally published on thingiverse.com by Domenic (Spotkiller) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
