Ford Fiesta mk7 Gun Metal Rim Center Cap (60mm) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford Fiesta mk7 Gun Metal Rim Center Cap (60mm)

0 downloads72 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

As a result of long research, I realized that there is no ready rim center for the ford fiesta gun metal rim. As a result, I designed it myself. This works extremely well but it's too tight to keep it from falling out so it's a bit difficult to snap into place. You can tap the cover with the side of your fist a few times to ensure that it fits snugly. Most likely, if you want to disassemble it, you will have to break the rim center you produced:D. When printing, you have to stop at a certain layer and change the filament color, if you don't know how, you can search the internet or ask me.